For interior wood - re-application is usually recommended every 3-5 years. Although, this is dependant on the amount of use and how often the surface is maintained. For exterior wood - re-application is usually recommended every 3-10 years. Although, this is dependant on the external elements. Woods in locations near the coast or are south-facing usually requires [...]
The floor can either be repaired with the Osmo Repair Set, which comes with a heating gun and several wax sticks. Heat the wax stick over the scratched surface and smoothen with a spatula. (choose the closest colour to match the wood) partially renovated, by cordoning off the plank of wood that the scratch or [...]
Absolutely - Osmo Canada does not import or retail any finishes which are in-excess of Canada's VOC laws and despite being well within limits, we are constantly working to lower our VOC content even further simply to show our commitment to a low solvent future.
Osmo finishes are not classed as a stain, or a lacquer and as such are not subject to the same VOC requirements set out by Environment Canada for wood stain. Hardwax-Oil and Softwax-Oil are classed as "Conjugated Oil Varnishes" whereby the VOC content concentration limit is 450 g/L. This higher allowance is due to the [...]
Our Polyx-Oil 2K, 5125, and entire Professional Colour Oil range is solvent-free and 50 g/l VOC and is great for the professionals, designers and architects who want a solvent-free coating, but do not want to compromise on quality or colour choice!
Yes, however we include only enough low-odour benzene-free mineral spirits within our products to allow them to be easily applied and no more. Also due to the natural oil and wax content of our products, they cannot be compared against conventional finishes from a viewpoint of emmissions.
Osmo offers two types of hardwax-oil wood finishes for exotic woods: Osmo Polyx Oil 2K Osmo Wood Wax Finish - Extra Thin Both are suitable for finishing exotic woods; however, we always advise that you try a small sample before applying the finish to the entire surface.