Polymer Composite Maintenance Oil

Find a Dealer Near You

APPLICATION TOOLS

Specially developed for composite decking

Osmo Polymer Composite Maintenance Oil is a specially developed solution designed to refresh and maintain WPC (wood-plastic composite) and BPC (bamboo-plastic composite) surfaces. Ideal for use on composite decking, cladding, and outdoor furniture, this high-performance oil revives faded surfaces, restores even coloration, and offers long-lasting protection against weathering and dirt. The fast-drying formula is easy to apply and helps extend the life and appearance of composite materials—without forming a film or peeling over time.

  • Developed for WPC/BPC: Perfectly suited for composite decking, cladding, and outdoor furniture
  • Restores Even Colour: Revives dull, greying surfaces and restores rich, consistent tones
  • Water-Repellent Protection: Helps protect against moisture, dirt buildup, and weathering
  • Easy Application: No sanding or priming required. Simply clean, apply, and enjoy
  • Microporous Formula: Allows the surface to breathe; will not crack, flake, or peel
  • Drying Time: Walkable after 8–10 hours in normal conditions

SPECIFICATIONS

Approx. Coverage

430ft²/L (40m²/L)

Number of Coats

1 coat

Application Temp.

Non-Applicable

Approx. Dry Time

8-10hrs.

Sizes

1L

APPLICATION

  1. Prepare the Surface: Ensure the composite surface is weathered, clean, dry, and free of frost.

  2. Clean Thoroughly: Use Osmo Polymer Composite Cleaner (8021) to remove dirt and residues. Rinse well with water and allow the surface to dry completely.

  3. Ready to Use: Do not thin the oil. Stir thoroughly before application.

  4. Apply Evenly: Using a brush or Osmo Floor Brush, apply a thin, even coat along the grain of the surface.

  5. Drying Time: Allow 8–10 hours to dry under good ventilation before subjecting the surface to foot traffic or further treatment.

Note:
Osmo oils enhance the natural tone of the surface, creating a permanent “wet look” effect. We strongly recommend a trial application first.

This product may alter the slip resistance of the original surface. White or very light-coloured composites may take on a slight yellow tint after oiling.

Do not apply to non-absorbent surfaces such as glass, glazed tiles, ceramics, or plastics.

DOCUMENTATION

PRODUCT INFORMATION
MSDS