TopOilHIGH SOLID

Find a Dealer Near You

APPLICATION TOOLS

FOOD-SAFE HARDWAX-OIL
Osmo TopOil High Solid is a food-safe Hardwax-oil wood finish designed for Countertops that is extremely tough and hard-wearing. It is water repellent and dirt resistant as well as resistant to wine, beer, cola, coffee, tea, fruit juices, milk and water. These types of liquid spillages will tightly bead on the surface without leaving any marks, simply clean by wiping with a cloth.

  • DIN and EN rated for direct contact with food
  • Ideal for countertops, tabletops, chopping boards, ect.
  • Very durable and hard-wearing – water and chemical resistant
  • Resistant to common liquid spillages such as wine, beer, cola, coffee, tea, fruit juice, milk and water according to DIN 68861-1A
  • Saliva-resistant and sweatproof, suitable for children’s toys
  • Microporous, breathable finish which does not crack, peel or flake
  • Can be spot-repaired and refreshed without sanding
  • Based on renewable raw materials – soybean, sunflower, thistle oil, and carnauba and candelilla wax

SPECIFICATIONS

Approx. Coverage

24m²/L (258ft2/L) with one coat

Number of Coats

 

2 coats: brush
3-4 coats: cloth

Application Temp.

+5°C to 35°C

Approx. Dry Time

8-10hrs.

Sizes

5mL, 0.5L

3056

Clear

3025

Natural

3026

Acacia

Note: The above colour shades are a true likeness of the original, after application onto Oak. However, some variation may occur due to screen brightness and uploading processes. It is advisable to test colours on a small sample, as colour may appear differently on other wood species.

APPLICATION INSTRUCTIONS

Apply three thin coats with a lint-free cloth.

  1. Scrub product into wood using cloth in a circular or figure 8 pattern
  2. Allow roughly 15-minutes for oils to penetrate
  3. Working with the grain, remove all excess product from surface
  4. Allow 8-10 hours drying time before recoating
  5. Apply second and third coats following previous steps

Apply two thin coats with an Osmo Natural Bristle Brush or similar brush.

  1. With a brush, work product into wood working in all directions, ensuring a thin application
  2. Allow roughly 15-minutes for oils to penetrate
  3. Working the brush with the grain, evenly distribute all product on surface and remove excess
  4. There should be no visible high-build or film – if this is observed, product is over applied
  5. Allow 8-10 hours drying time before recoating
  6. Apply second coat following above procedure
  7. Clean brushes using Osmo Brush Cleaner and Thinner or Turpentine

Tinting: Osmo Wood Wax Finish can also be used to lightly tint TopOil 3056 up to a ratio of 10:1. Do not exceed a ratio of 10 parts TopOil 3056 to 1 part Wood Wax Finish.

DOCUMENTATION

PRODUCT INFORMATION
MSDS
DECLARATION

Application onto a live edge table

Application to a Chopping Board

Application on Countertops