Flat Brushes

Find a Dealer Near You

Obtain Outstanding Results

Osmo Flat Brushes are specially designed for the application of Osmo wood finishes. Made from 100% natural bristles, these high-quality made in Germany brushes are designed specifically for the quick and efficient application of Osmo products.

TIPS

  • The brush should only be saturated lightly. Please be aware that Osmo-Oils have a high yield (see product label). Product excesses and brush marks must be blended and smoothed out immediately.
  • After finishing work, the Brush can be wrapped in saran wrap and kept airtight until required for the 2nd coat the next day.
  • Use Osmo Brush Cleaner and Thinner 8000 for gentle cleaning

SPECIFICATIONS

Width

25mm, 50mm, 60mm, 100mm

DIRECTIONS

  1. Stir the finish well prior to use and pour into a tray.
  2. Take the Osmo Natural Bristle Brush and dip entire brush until approximately 1cm away from ferrule into Osmo product.
  3. Remove excess from brush sides and faces against edge of tray or can. You are now ready to Osmo.
  4. Brush the finish very thinly and evenly onto the wood floor following the grain in a back-and-forth, light scrubbing motion.
  5. Take care to avoid brush-stops, excessive areas of product
  6. Store the brush for the 2nd coat in a plastic bag or wrapped in saran wrap overnight, to prevent drying
  7. Clean with Osmo Brush Cleaner and Thinner 8000