Our new advanced North American formulation of Polyx®-Oil – our best selling Hardwax-Oil wood finish based on natural vegetable oils and waxes.
Extremely durable and hardwearing – will not crack, flake or peel
Resistant to water, dirt, and common household spills
Microporous and molecularly bonds with the wood fibres
Easily applied with a brush, roller, buffing pad, or cloth
Can be spot repaired and/or renewed with no sanding required
Made in Germany – Conforms to strict German and European norms
258ft²/L (24m²/L) / per coat
Number of Coats
+5°C to 35°C
Approx. Dry Time
5mL, 0.125L, 0.750L, 2.5L, 10L
Remarque: Les teintes ci-dessus reflètent les images originales après application sur Chêne. Cependant, une certaine variation de teinte peut se produire en raison de la luminosité de l’écran et des processus de téléchargement. Il est conseillé de tester les couleurs sur un petit échantillon parce que le ton peut apparaître différemment sur d’autres essences de bois.
First Coat: Apply one thin coat with an Osmo Floor Brush or Osmo Floor Roller. Our rollers have a 4.5mm nap.
Stir the Polyx®-Oil well and prior to use
Brush or roll the product thinly and evenly onto the floor.
Do not remove excess product, this will absorb into the wood surface over the drying period
Allow 8-10 hours drying time prior to proceeding to second coat
Second Coat: Roll or Brush a thin second coat
Brush or roll the second coat thinly and evenly onto the floor
Allow approximately 5-10 minutes for product to penetrate surface
Allow 8-10 hours drying time. Allow for good ventilation whilst drying.
Third Coat: Usually a third coat is not required, however highly absorbent or dry timbers may appear to require a third coat.
Please consult OSMO technical support at 1-844-OSMOCAN prior to carrying out a third coat
Tinting: Osmo Wood Wax Finish can also be used to lightly tint Polyx®-Oil 3054 up to a ratio of 10:1. Do not exceed a ratio of 10 parts Polyx®-Oil 3054 to 1 part Wood Wax Finish.
Ex. For Natural (no colour change from raw wood) tint Polyx-Oil with Wood Wax Finish 3111 White at 3% for the base-coat, followed by a coat of clear (untinted) Polyx-Oil as a top-coat.
Cure Period: Osmo Hardwax-Oil(s) like all floor finishes have a cure period. We recommend allowing 2 weeks for the surface to fully cure and harden prior to damp-mopping or placing rugs/mats on the surface.
Osmo Natural Bristle Brushes are specially designed for the application of Osmo wood finishes. Made from 100% natural bristles, these high-quality made in Germany brushes are designed specifically for the quick and efficient application of Osmo products.
Osmo Floor Brushes are specially designed for the application of Osmo Polyx-Oil(s) and Wood Wax Finishes. Made from 100% natural bristles, these high-quality made in Germany brushes are designed specifically for the quick and efficient application of Osmo products. Brush handle has locking connection for Osmo Telescopic Handle.