Wood Wax Finish Clear Extra Thin
Wood Wax Finish Clear Extra Thin
Wood Finish for Dark Hardwood and Exotic Woods
Clear, satin wood finish which combines all the advantages of oils and waxes in one unique product. Osmo Wood Wax Finish Clear Extra Thin is resistant to water and dirt, is very durable and smoothens wood surfaces. In comparison to other wood finishes, the natural vegetable oils and waxes allow for an even colouring and a harmonic, smooth surface result. Easy application – no need for primer or sanding between coats – saves time and money. It meets the wood’s natural demands: it is microporous and does not crack, flake, peel, or blister. Resistant against wine, beer, cola, coffee, tea, fruit juice, milk, and water in accordance with industrial norms. When dry, the finish is safe for humans, animals, and plants and is suitable for children’s toys, and fast to perspiration and saliva.
- Especially suitable for finishing exotic woods and dark hardwoods either as a base coat or a stand-alone
- Based on natural, rapidly renewable resources
- Microporous – won’t crack, peel, flake, or blister
- Breathable and moves with the wood
- Resistant against wine, beer, cola, tea, fruit juice, milk, and water
- Easy cleaning and maintenance
Natural Bristle Brushes
Osmo Natural Bristle Brushes are specially designed for the application of Osmo wood finishes. Made from 100% natural bristles, these high-quality made in Germany brushes are designed specifically for the quick and efficient application of Osmo products.
Osmo Floor Brushes are specially designed for the application of Osmo Polyx-Oil(s) and Wood Wax Finishes. Made from 100% natural bristles, these high-quality made in Germany brushes are designed specifically for the quick and efficient application of Osmo products. Brush handle has locking connection for Osmo Telescopic Handle.
Floor Roller Set
Microfibre Roller for application of clear Osmo Polyx-Oils.
Roller & Brush Set
Microfibre Roller and Natural Bristle Brush set for the application of Osmo Finishes.
To apply this the wood surface must be clean, dry and frost-free (maximum 18% wood moisture). Osmo Wood Wax Finish Clear Extra Thin is ready to use, do not thin. Stir well before use. Clean or slightly sand old microporous finishes and remove old varnish (with Osmo Paint Remover or sanding). Make sure to always wear a dust mask when sanding. Small cracks, larger dents, and small holes can be filled in with Osmo Woodfiller. Sand carefully before application, starting with course paper and finishing with P120 – P150 for flooring and P180 – P240 for furniture. Remove dust etc. thoroughly from the surface with a brush or vaccuum cleaner before application. We always suggest a sample trial before finishing your entire surface.
To apply the finish you can brush, wipe, dip or spray (in closed chambers). Apply evenly along the wood grain with a brush or cloth.
1st coat: Apply thinly. Leave to dry for approximately 30 minutes. Remove all surplus. Re-coat areas that are not sufficiently treated.
2nd coat: Apply thinly. Leave to dry for approximately 30 minutes. Remove all surplus.
If you are finishing cupboards, wardrobes and drawers only one thin coat is necessary and should be applied with a cloth. To clean your tools you can use Osmo Brush Cleaner.
For a high-sheen effect and extra durability you can apply one coat of Wood Wax Finish Clear Extra Thin as a base coat, and use Polyx-Oil for the second coat.
There is a 12 hour drying time under normal climatic conditions for Osmo Wood Wax Finish Clear Extra Thin.