Polyx®-Oil Pure Full Solid

By
 In

Polyx®-Oil Pure Full Solid

Osmo Polyx® Professional Hardwax-Oil is resistant to water and dirt, is extremely durable and smoothens wood surfaces whilst enhancing the natural beauty of the wood character. Solvent-free and under 50 g/L VOC offering an environmentally friendly alternative to professionals. Two coats are applied in one day (wet-on-wet) whereby the finish dries and cures within 8-12 hours!

Commercially designed

Osmo Polyx® Professional Hardwax-Oil is resistant to water and dirt, is extremely durable and smoothens wood surfaces whilst enhancing the natural beauty of the wood character. Solvent-free and under 50 g/L VOC offering an environmentally friendly alternative to professionals. Two coats are applied in one day (wet-on-wet) whereby the finish dries and cures within 8-12 hours!

Application Options

Cloth_Icon Scraper_Icon Machine_Icon

Information

Colour Tone

Specifications

Approx. Coverage
30m²/L (320ft2/L) with two coats
Number of Coats
2 coats (wet-on-wet)
Application Temp.
+5°C to 35°C
Approx. Dry Time
8-12hrs.
Sizes
5mL, .125L, 1L

Advantages

  • Two coats in one day – entire coating performed in one day
  • LEED Compliant – Low-VOC – Solvent-free
  • Extremely high coverage
  • Enhances the wood’s natural character
  • Resistant to common liquid spillages such as water, juice, tea, cola and wine
  • Saliva-resistant and sweatproof, suitable for children’s toys
  • Microporous, breathable finish which does not crack, peel or flake
  • No sanding necessary for spot repairs or future applications
Application Tools

FloorXcenter

Osmo FloorXcenter is a lightweight and easy to manage floor buffing unit which has a soap dispenser that enables the user to dispense the optimal amount of a pre-loaded cleaner, such as a mixture of Osmo Intensive Cleaner, or Osmo Wash and Care for easy floor maintenance. Can be used to clean, resurface as well as colour and refinish floors with Osmo wood finishes.


How-to

MECHANICALLY WITH A FLOOR BUFFER

Apply two thin coats with an Osmo FloorxCenter® or floor-buffing machine, with green and white pads.

First Coat: Apply one thin coat with an Osmo Double Sided Scraper, Professional Scraper or other high quality trowel, and Osmo FloorxCenter® or single disc floor-buffing machine.

  1. Stir the Polyx®-Oil Pure well prior to use.
  2. Trowel the product thinly onto the floor using an Osmo Double Sided Scraper or similar.
  3. Disperse and polish the floor using a floor buffer and green pads.
  4. Allow approx. 35-45 minutes for product to penetrate surface
  5. Proceed immediately to second coat

Second Coat: Immediately after the first coat of Polyx®-Oil Pure, apply a second thin coat with a trowel and buffing machine.

  1. Trowel the second coat product thinly and evenly onto the floor.
  2. Allow approx. 35-45 minutes for product to penetrate surface
  3. Disperse and polish the floor, removing excess using a floor buffer and white pads
  4. There is too much material on the surface when you can see rings. If so, turn the pad over.
  5. Allow 8-10 hours drying time. Allow for good ventilation whilst drying

If using as a Polyx®-Oil Pure 5125 as a top coat over Polyx® Professional Colour Oils, proceed immediately to second-coat. Only one coat of Polyx-Oil is required over top of an Polyx® Professional Colour Oil therefore the first coat and its steps are omitted.

Tip: 13” (330mm) Pads on an Osmo FloorxCenter® will buff around 400ft2 before they require either flipping, or replacement

BY HAND WITH SCOTCHBRITE PADS

For small areas and furniture, apply two thin coats with a non-abrasive, white scotchbrite pad and a lint-free cloth.

  1. Stir the Polyx®-Oil Pure 5125 well and pour a small amount into a disposable container
  2. With a white scotchbrite pad work the product into the wood evenly in figure 8 or circular motions
  3. Be sure to thinly and evenly coat the surface and leave on the surface for approx. 35 minutes
  4. With a clean lint-free cloth, polish the surface ensuring no rings, wipe marks or blotches
  5. Ensure all excess product is removed from surface.
  6. Approx. 8-10 hours drying time. Allow for good ventilation whilst drying
  7. Apply second coat following steps 1-6

Tinting: Osmo Polyx® Professional Colour Oils can also be used to lightly tint Polyx®-Oil Pure 5125 up to a ratio of 10:1. Do not exceed a ratio of 10 parts Polyx®-Oil Pure 5125 to 1 part Professional Colour Oil.