Industrial Wood Wax Finish

By
 In

Industrial Wood Wax Finish

Osmo Industrial Wood Wax Finish is an oil/wax based Hardwax-Oil coating designed specifically for professional spray application through HVLP, Airless, Air-Assisted or Gravity-fed systems.

Polyx® Sprayable Hardwax-Oil system

Osmo Industrial Wood Wax Finish is an oil/wax based Hardwax-Oil coating designed specifically for professional spray application through HVLP, Airless, Air-Assisted or Gravity-fed systems. Well suited to Millwork, Cabinets, Furniture and Staircases. Microporous and will not peel, crack, flake or blister. Resistant against dirt, water, wine, beer, coffee, tea, ect.
 

Application Options

Spray_Icon Brush_Icon

Accreditations

human-safeoil-advantages

Information

Colour Tone

Specifications

Approx. Coverage
258ft²/L (24m²/L)
Number of Coats
2 coats
Application Temp.
+5°C to 35°C
Approx. Dry Time
4-6 hours
Sizes
2.5L, 10L, 25L

Advantages

  • Designed for professional spray application
  • Extremely durable and hardwearing
  • Quick processing and dry times by comparison
  • Can be spot-repaired and refreshed with no sanding required
  • Microporous finish which does not crack, peel or flake
  • Very water and dirt resistant, Saliva-resistant and sweat proof
  • Cross compatible with TopOil(s), Polyx-Oil(s), Wood Wax Finishes and Polyx Professional Colour Oils
Application Tools

Natural Bristle Brushes

Osmo Natural Bristle Brushes are specially designed for the application of Osmo wood finishes. Made from 100% natural bristles, these high-quality made in Germany brushes are designed specifically for the quick and efficient application of Osmo products.


How-to

SPRAY WITH A GRAVITY-FED GUN, HVLP, AIRLESS OR AIR ASSISTED DEVICE

Apply two thin coats, sanding between coats

First Coat: Apply one thin coat, allow product to dry and then lightly sand with P320 or above.

  1. Spray approx. 30-40 g/m2 onto wood surface
  2. Dust dry after approx. 2-3 hours at 20ºc or approx. 1 hour with 50ºc ambient air temperature
  3. Ready for sanding after 6-8 hours or 2-3 hours respectively
  4. Intermediate sanding P320 grit – a higher grit will produce a higher end sheen

Second Coat: Apply a second thin coat, allow to dry overnight, packaging next day.

  1. Spray approx. 30-40 g/m2 onto wood surface
  2. Dust dry after approx. 2-3 hours at 20ºc or approx. 1 hour with 50ºc ambient air temperature
  3. Clean tools with Osmo Brush Cleaner and Thinner (benzene-free)

Gravity-Feed Cup

Airmix Pump

Final Sanding

P150

P150

Nozzle Size

1.6mm

0.013” or .33mm

Spray Angle

40°

Pressure (Air)

3.0 bar

Pressure (Control Air)

2.0 bar

Material Pressure

80 bar

Application amount g/m2

30-40

30-40

Drying time

Depending on conditions

Depending on conditions

Smoothing

P220 +

P220 +

Dust Removal

Yes, important!

Yes, important!

Tip: Industrial Wood Wax Finish can be tinted (up to 10% by volume) with Osmo Wood Wax Finishes

Tip 2: Industrial Wood Wax Finish can be used like a regular wiping varnish, applied using a brush or cloth/rag.