Liquid Wax Cleaner

Find a Dealer Near You

INTENSIVE CLEANING AND SURFACE REFRESHING
Osmo Liquid Wax Cleaner is specially designed for initial cleaning, occasionally refreshing and maintenance of wooden floors, furniture and wood treated with Osmo Polyx®-Oil as well as most other conventional wood finishes. Based on natural vegetable waxes – regenerates and cleans the surface at the same time. It is easy to use and allows a quick and economical application.

  • Cleans and regenerates the wood at the same time
  • Maintains protected surfaces without extensive treatment
  • Easy to use for occasional or regular usage
  • Replenishes natural hard waxes, without forming a film on the surface
  • Suitable for domestic and commercial use
  • Liquid Wax Cleaner can also be used to enhance the sheen level of the surface

SPECIFICATIONS

Approx. Coverage

850-1000 ft2

Approx. Dry Time

30-40 mins

Sizes

400mL Spray, 1L

APPLICATION INSTRUCTIONS

Apply a small amount on a cloth or White Scotchbrite pad and scrub the dirty area

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using a White Scotchbrite pad, scrub a small amount of the product into the dirty area
  3. Wipe away dirt residues

For Heavier Stains: Apply to floor with Osmo polishing pad (very thin steel wool) or on Oak floors, a Green Scotchbrite pad. Wipe off dirt residues and reapply Osmo Polyx®-Oil to area and blend into the existing finish.

Apply a thin coat with a microfiber cloth.

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using the microfiber cloth, work a thin and even coat of the Liquid Wax Cleaner across the floor.
  3. Approx. 1 hour drying time. Allow for good ventilation whilst drying
  4. Can be polished to raise sheen, once dried with a clean micro-fibre cloth

Apply a thin coat with an Osmo FloorxCenter and MicroPad; or other single disc buffer and carpet

  1. First clean the wood surface with Osmo Wash & Care and wipe dry
  2. Using the MicroPad, work a thin and even coat of the Liquid Wax Cleaner across the floor.
  3. Approx. 1 hour drying time. Allow for good ventilation whilst drying
  4. Can be polished to raise sheen, once dried

Apply a thin coat with a clean lint-free cloth, or microfiber cloth

  1. First clean the wood surface and wipe dry
  2. Using the cloth work a thin and even coat of the Liquid Wax Cleaner into the wood
  3. Approx. 1 hour drying time. Allow for good ventilation whilst drying
  4. For Furniture, additional coats may be added to further protect
  5. Can be polished to raise sheen, once dried, with a clean lint-free cloth

DOCUMENTATION

PRODUCT INFORMATION
FDSS
DECLARATION